Procedures
Each type of transaction follows a documented, step-by-step procedure. Select one to read it in full.
FOB Tank to Tank
FOB Tank to Tank
Terms and Conditions
1) Buyer issues ICPO containing the seller’s working procedure and banking details, along with the buyer’s nominated TSA and company registration certificate
2) Seller issues a commercial invoice of the product in tanks at the port; the buyer signs and returns the commercial invoice along with an acceptance letter.
3) Seller issues an appointment letter for the seller representative to present a fresh SGS Report of less than 24 hours to the buyer, and the buyer’s logistics for proper verification at the buyer’s Tank Terminal upon successful SGS verification; seller inspects buyer’s tank for injections
4) Upon confirmation of successful verification of the SGS Report by the Buyer company and the Buyer’s Tank Farm Company, the Seller issues
a) IPA signed by buyers and the Tank Farm
b) Authorization to sell and collect
c) Commitment to supply
d) Statement of availability of product
5) Upon confirmation of the signed INJECTION PERMISSION AGREEMENT, seller issues to buyers
a) Fresh SGS report of less than 24 hours on the buyer’s company name
b) Q&Q Report. And Injection Report.
c) Authorization to verify the product physically in sellers’ tank (ATV)
d) Tank Storage Receipt (TSR)
6) Buyer conducts a dip test on the product in the seller’s tank and makes the payment for the total value of the product via MT103-TT to enable the injection process into their Nominated tanks
7). Seller pays all intermediaries involved in the transaction, and subsequently, monthly shipments continue as per the terms and conditions of the sales and purchase agreement between buyer and seller.
Dip & Pay Transaction Procedures FOB
Dip & Pay Transaction Procedures FOB
Transaction Procedures
1. Buyer confirms FCO/SCO and issues ICPO/TSA
2. Seller issues commercial invoice (CI) for the available quantity in the seller’s storage tank. The Buyer signs the CI and returns the CI to the Seller with the signed tank storage agreement (TSA) for Seller’s approval.
3. Seller issues the following PPOP documents to the Buyer:
a) Authorization to Physically Verify Product (ATV) to be endorsed by all Parties.
b) Authorization to Sell & Collect (ATSC).
c) Product Authentication Certificate.
4. Seller provides a fresh SGS Report, Tank Storage Receipt and opens communication with the SGS office & storage provider for immediate Dip Test of the product.
5. Buyer books the SGS to conduct a Dip Test in the end seller’s storage tank, and the Buyer pays SGS from his account for all the SGS charges for inspection and provides Q&Q reports in full. The Buyer will provide a copy of the Q&Q reports to the Seller free of charge. The Buyer provides tank details to the End Seller after performing a Dip Test by SGS on his account, and then the Seller injection commences to the Buyer’s tank.
6. Within 24 hours, the Buyer makes a 100% TT wire transfer payment to the End Seller, and the End Seller changes the title of ownership to the Buyer while receiving the total amount.
7. Seller pays all Seller’s side intermediaries involved in the transaction, and subsequently monthly shipment continues as per terms and conditions of the Commercial Invoice, and extension of the transaction by issuing a twelve (12) months contract to the Buyer for proceeding.
FOB Escrow
FOB Escrow
Terms and Conditions
1. Buyer issues ICPO, company information sheet, copy of Buyer’s representative’s passport, and Charter Party Agreement (CPA) to Seller.
2. Seller issues Commercial Invoice (CI). BUYER signs the CI.
3. Seller issues Escrow Agreement providing for Buyer to place into escrow the funds required to extend and take over Seller’s tank storage for the days required for Injection /Inspection of Products. Escrow account will be held at a major international law firm or financial institution in the USA, UK,/ASIA as allocated by the Seller Company.
4. Buyer and Seller Sign Escrow Agreement.
5. Buyer deposits funds in Escrow Account Equivalent to the amount payable for min 5 days TSR.
6. Upon confirmation that Buyer’s funds have been deposited into Escrow Account, Seller sends the following Proof of Product (POP) documents to Buyer:
• Commitment to Supply
• Certificate of Origin
• Authorization to Sell and Collect (ATSC)
• Authorization to Verify (ATV) Physically
• Tank Storage Receipt (TSR)
• Injection Report
• Quality Certificate (Product Passport)
• Fresh SGS Analysis Report (not older than 48 hours)
• Unconditional Dip Test Authorization (UDTA)
7. Within 48 hours (two business days), and upon successful verification by BUYER of the above POP documents, funds in the Escrow Account are released, and Seller’s Tank Storage Provider issues a 5-day TSR in Buyer’s name.
8. Buyer conducts a Dip Test in tanks in seller’s tank.
9. Upon confirmation that Dip Test results match product specifications, Seller injects fuel into Buyer’s nominated vessel and sends the injection report to Buyer.
10. Upon confirmation of the injection report, Buyer sends payment for the full value of the injected product by MT103 to the Seller’s named bank account.
11. Upon receipt of payment, Seller transfers Ownership Title to Buyer, and immediately, Seller should pay Commission as per NCNDA/IMFPA
12. SELLER issues a 12-month Sales and Purchase Agreement (SPA). SPA requires non-transferable, revolving SBLC/IRDLC for the value of each monthly quantity, and that the Buyer pay after Dip Test by MT 103 wire transfer for each monthly quantity. Monthly deliveries continue per SPA and commission as per NCNDA/IMFPA
FOB Tank to Vessel
FOB Tank to Vessel
Terms and Conditions
1. Upon acceptance of the seller’s offer, the buyer issues a purchase order [ICPO], Passport copy, License, and CPA
2. Upon acceptance of the buyer’s ICPO, the seller issues a commercial invoice for the buyer’s review and signing of the trail lift order for the awarded allocation
3. Buyer and seller sign a contract with a pipeline injection company to make payment for the injection of product from the seller’s tank to the buyer’s vessel
4. SELLER sends the following Proof of Product (PPOP) documents to Buyer:
a Commitment to Supply
b Certificate of Origin
c Authorization to Sell and Collect (ATSC)
d Product Passport.
Upon receipt of PPOP documents and confirmation, Buyer and Seller jointly pay for the Product Pipeline Injection.
5 Seller issues the POP documents as shown below;
-Dip Test Authorization [DTA]
-Fresh SGS Report
-Q&Q Report
-Ullage Report
– Tank Storage Receipt
-Tank Injection Report
-Authorization to Verify
6. Seller commences injection to buyer’s tank storage. Buyer inspects by SGS.
7. Seller issues document to all intermediaries involved in the transaction and to the seller/buyer. Endorsed NCNDA/IMFPA.
8. Buyer makes payment for the product via MT103 after completing the injection and receiving a copy of the bill of lading, and the seller transfers title ownership to the buyer and sign yearly contract for delivery.
9. Seller, within seventy-two (72) hours, pays commissions to all intermediaries involved in the transaction as agreed.
Tanker Take Over (TTO)
Tanker Take Over (TTO)
Terms and Conditions
1. Buyer issues official ICPO containing the seller’s working procedure, banking details, and company registration Certificate
2. Seller issues Memorandum of Understanding (MOU) and Commercial Invoice (CI) to the buyer for endorsement, Buyer review, and Endorse the MOU, returning with a ready Proof of Funds for the payment of the Title Transfer
3. Upon the receipt of the countersigned MOU from the buyer, the Seller issues the listed documents below:
a). Copy of Certificate of Origin
b). Copy of Product Passport (Analysis Result)
c). Copy of Ullage Report
d). Copy of Cargo Manifest
e). Copy of Bill of Lading
f). Copy of Vessel’s Q88
g). Copy of E.T.A (Estimated Time of Arrival) of Vessel
3.1. Buyer issues an official letter with details of the destination port/Buyer’s Tank Storage coordinates OPL STS and confirms readiness to receive the pregnant vessel at the discharge port. Buyer requests for Notice of Readiness; the vessel to master releases NOR and ETA to Buyer, and upon receipt of NOR and ETA, Buyer responds; the vessel commences voyage to Buyer’s destination port/Buyer coordinates OPL STS.
4. Buyer deposits $ 500,000 USD for the vessel rerouting cost directly to the shipping company before the vessel captain can be instructed to sail the vessel directly to the destination port
5. Buyer confirms the documents of the goods and, within 48 hours, sends payment to the Seller.
6. Upon Seller’s receipt of the payment, Seller instructs the vessel captain to sail the vessel to the buyer’s destination port and change the product’s title and shipping documents to the buyer company name and issues all new ownership documents to Buyer Company, inclusive of a reversed Bill of Lading (importer/consignee) within 24 hours.
7. Seller then arranges for the Vessel to be directed to the buyers upon arrival of the vessel at the buyer’s discharge Port, Seller issues an Authorization for the buyer’s representatives and inspection team to board the Vessel and conduct Q&Q Inspection.
8. Upon arrival of the product at the buyer’s destination port, the buyer conducts CIQ on the product and releases the remaining balance of the cargo via MT103 after satisfaction of the CIQ result.
CIF ASWP – Working Terms and Conditions
CIF ASWP – Working Terms and Conditions
Cost, Insurance and Freight (CIF) ASWP
1. Buyer issue ICPO containing the seller’s working procedure and banking details along with their Official buyer’s company registration certificate and Corporate Profile (CP),
2. Seller sends Sales and Purchase Agreement (SPA) to Buyer for complete review and Endorsement
3. Upon Complete review, the buyer fully signs and stamps the SPA and return to the seller with a Valid Proof of Funds (POF) and a letter of financial readiness to transact.
4. Seller legalizes and registers the contracts with the appropriate Authorities of the Ministry of Energy and Issues Partial Proof of Product (PPOP) Documentation to the buyer as stated:
A. Product Passport
B. Certificate of Product Origin
C. Statement of Availability of Product from the Ministry of Energy
D. Company Profile/KYC
E. Company Registration Certificate
F. Commitment Letter to Supply
5. Seller Company appoints a tested/reliable shipping, Seller and end buyer will sign the Charter Party Agreement (CPA) together with the Shipping and Logistic Company (A three-party CPA).
6. Seller/Buyer makes payment for the Chartered Freight Cost with the appointed shipping company for the transportation of the product to the buyer’s designated discharge port. (Fee made by buyer will be deducted when making payment for the total cost of the product at the discharge port after a successful CIQ/SGS test at the discharge port)
7. Seller Company releases copies of the POP and Shipping documents to the buyer Company. Copy of the Charter Party Agreement to transport the product to the discharge port.
a) Copy of Shipping Schedule Document.
b) Product Analysis Report.
c) Certificate of Origin.
d) Bill of Lading
e) Tank Receipt. Vessel Q88.
f) SGS Report.
g) Certificate of Product.
8. Upon Confirmation of POP by the buyer, Seller alerts buyer on the shipment ordered graphic/schedule, accompanied by the submission of the nominated vessel details to the buyer. Buyer issues an official letter with details of the destination port/Buyer’s Tank Storage coordinates OPL STS and confirms readiness to receive the pregnant vessel at the discharge port. Buyer requests Notice of Readiness; the vessel to master releases NOR and ETA to Buyer, and upon receipt of NOR and ETA,
9. Buyer responds; the vessel commences voyage to Buyer’s destination port/Buyer coordinates OPL STS.
10. Seller commences shipping the product and releases the listed shipping documents to the buyer.
11. The vessel arrives at the maritime location of the buyer. The buyer’s vessel also meets the seller’s vessel at the agreed location for trans-loading and unloading to commence.
12. Upon successful product confirmation against the SGS/CIQ report of quality and quantity at the destination port, the buyer makes payment by MT103.
13. Seller within seventy-two (72) hours, the seller pays commissions to the seller side and the buyer pays buyer side intermediaries involved in the transaction
DOCUMENTATION
• Invoice in 1 original + 2 copies
• Certificate of Origin from the Chamber of Commerce.
• Full set of Bill of Lading (B/L) 3 originals +3 copies, marked freight prepaid.
• Clean on-board B/L to be signed either by the master of the vessel or the agent of the vessel at the port of loading.
• Certificate of weight, quality, and analysis – by SGS at time of loading.
• insurance policy to cover 110% value of the goods
CIF ASWP – Escrow Terms and Conditions
CIF ASWP – Escrow Terms and Conditions
Cost, Insurance and Freight (CIF) ASWP
1. Buyers issues irrevocable corporate purchase order (ICPO) addressed to the seller along with company profile and buyer’s passport.
2. Seller issues the draft spa for the buyer’s review and signing. Upon signing of spa, the seller appoints a third- party escrow service where both parties make a refundable 5% escrow deposit as a performance bond against any party that fails to perform their contractual obligation.
3: Upon the receipt and confirmation of the escrow deposit by both parties, the seller legalizes and registers the contracts with the insurance company and notarizes them with the appropriate authorities of the Ministry of energy along with the below PPOP document and an official invitation letter for the buyer to visit and inspect the product.
a. Product quality passport quality certificate.
b. Certificate of product origin.
c. Product availability
d. Proforma invoice for the liftable quantity
e. Registered & legalized contract with allocation
e. Commitment letter to supply the product.
5. Upon Confirmation of PPOP by Buyer, Seller charters a shipping/logistic company and alerts Buyer on the shipment ordered graphic/schedule, accompanied by the submission of nominated vessel details to the buyer. Buyer issues an official letter with details of the destination port/Buyer’s Tank Storage coordinates OPL STS and confirms readiness to receive the pregnant vessel at the discharge port. Buyer requests for Notice of Readiness, vessel to master releases NOR and ETA to Buyer and upon receipt of NOR and ETA, Buyer responds, the vessel commences voyage to Buyer’s destination port/Buyer coordinates OPL STS.
6. Seller commences loading and shipping the product and releases the listed shipping documents to Buyer; escrow releases the 5% back to both parties as proposed.
7. Vessel arrives at the maritime location of the buyer. The buyer’s vessel also meets the seller’s vessel at the agreed location for trans-loading and unloading to commence.
8. Upon successful product confirmation against the SGS/CIQ report of quality and quantity at the destination port, the buyer makes payment by MT103.
9. Seller within seventy-two (72) hours, the seller pays commissions to the seller side, and the buyer pays buyer side intermediaries involved in the transaction.
CIF ASWP – Banking Terms and Conditions
CIF ASWP – Banking Terms and Conditions
Cost, Insurance and Freight (CIF) ASWP
1. Buyer issue ICPO containing the seller’s working procedure and banking details along with their Official buyer’s company registration certificate and Corporate Profile (CP),
2. Seller sends Sales and Purchase Agreement (SPA) to Buyer for complete review and Endorsement
3. Upon Complete review, the buyer fully signs and stamps the SPA and return to the seller with a Valid Proof of Funds (POF), BCL, and a letter of financial readiness to transact.
4. Seller legalizes and registers the contracts with the appropriate Authorities of the Ministry of energy and Issues Partial Proof of Product (PPOP) Documentation to the buyer as stated:
A. Product Passport
B. Certificate of Product Origin
C. Statement of Availability of Product from the Ministry of Energy
D. Charter Party Agreement
E. Copy Notice of readiness to inject
F. Commitment Letter to Supply
4. Buyer’s bank, per seller’s verbiage, shall issue SBLC/DLC within six (6) working days for the first shipment’s value to the seller’s financial bank to enable the seller to commence loading of a product with the shipping company. seller to finalize loading within six (6) working days. But if the buyer fails to issue SBLC/DLC within six (6) working days, as an alternative provision buyer pays 3% (Negotiable between seller and buyer) of the total product value directly to the shipping company or a payment account designated by the Seller either via MT103, Bitcoin or USDT as a transaction guarantee which will be deducted from the product’s invoice value of the product at the destination port.
5. After confirmation by the seller’s bank, the seller at their own expense, charters with a shipping/logistic company and alert buyer on the shipment ordered graphic/schedule, accompanied by the submission of nominated Vessel details to the buyer.
6. Seller’s bank responds with contractual operative 3% PB and full POP to buyer’s bank within seventy Two (72) hours since the buyer’s instrument was confirmed by the seller’s bank
a) Copy of the Port Storage Agreement.
b) Copy of the CPA, to Transport the Product to the Discharge Port.
c) Vessel Q88.
d) Original BL (full set).
e) Copy of SGS Report.
7. Upon successful product confirmation against the SGS/CIQ Report of Quality and Quantity at the destination port, the buyer makes payment by MT103.
8. Seller, within seventy-two (72) hours, pays commissions to all intermediaries involved in the transaction as agreed.